Speak to a readiness specialist: 01249 796076
DCC Levels 0 and 1

DCC Level 0 and 1: what to expect

Most first-time MoD suppliers are asked for Level 0 or Level 1. This page explains what each one involves, how to tell which you need, and how we get you ready before the assessor looks at your evidence.

  • A plain-English comparison of the two levels
  • What drives the effort, so you can plan time and budget
  • A clear route from first call to a submission you're confident in

Get DCC-ready

Tell us where you are and we'll come back within one working day with a straight answer on what it'll take.

Readiness, not assessment

We get you ready. An independent assessor certifies you.

DCC is verified independently. The assessment itself is carried out by an approved certification body working under IASME, the scheme's delivery partner. We are not that body, and we don't mark our own work.

What we do is the part that decides whether you pass first time: confirming the level, closing the gaps, organising the evidence and checking everything before it goes in. Our readiness work is separate from the assessment, which keeps both honest.

Who is this page for?

Suppliers who have been told a contract needs DCC Level 0 or Level 1, businesses that want to understand the route before they bid, and teams who need Cyber Essentials sorted as part of the same plan.

Tell us about your contract
The two levels

Level 0 and Level 1 side by side

Both start from Cyber Essentials. The difference is how many controls you need to evidence and how much preparation that takes.

DCC
Level 0
Very low cyber risk
  • 3 controls
  • Cyber Essentials is the foundation
  • The shortest route to a certificate
Entry level
DCC
Level 1
Low to moderate cyber risk
  • 101 controls in four objectives
  • Cyber Essentials is the foundation
  • Policies, records and evidence all matter
Broad baseline
Comparison of DCC Level 0 and Level 1
 Level 0Level 1
Cyber risk it suitsVery lowLow to moderate
Controls3101
Cyber EssentialsNeededNeeded
Scope to defineLightNeeds real care
Evidence to prepareVery littleA full set
How predictable is the effort?VeryDepends on your starting point

A certificate covers its own level and any level below it, so a Level 1 holder also meets a Level 0 requirement.

Level 0

Level 0: short and focused

Level 0 is for contracts where the cyber risk is very low. It rests on three controls, and a valid Cyber Essentials certificate underpins it, so most of the work is making sure that foundation is current and covers the right scope.

If your contract only asks for Level 0, we keep the project proportionate: confirm the scope, check the Cyber Essentials position, and make sure the three controls are answered clearly and backed up.

If you might bid for bigger work later, we'll tell you now whether it's worth going straight to Level 1.

Level 1

Level 1: a proper baseline

Level 1 is for low to moderate risk and covers 101 controls, grouped into four objectives. The controls look at how you manage and protect information and systems day to day: access, configuration, supplier and people controls, and how you spot and respond to problems.

The assessor wants to see that these are real, written down and working. That is where most of the effort goes: policies that match what you actually do, records that show it happening, and a scope everyone agrees on.

For most businesses a gap analysis first is the quickest way to find out how much there is to do.

Our route

From first call to confident submission

Level 0 usually uses the shorter version of this route. Level 1 uses all of it.

  1. Confirm the level

    We read the Cyber Risk Profile on your tender or contract and agree which level you need.

  2. Check Cyber Essentials

    We look at your current certificate, its scope and its expiry, and plan any renewal or upgrade alongside the DCC work.

  3. Agree the scope

    We settle which people, sites and systems are in scope and write it down, so the assessor and you are working from the same picture.

  4. Gap analysis

    For Level 1, we go through each control, record where you stand and show you what's missing. This is also the point where you can see the real size of the job before committing further.

  5. Fix and evidence

    We help with the policies, the technical changes and the records, then pull the evidence together in the form an assessor expects.

  6. Pre-submission review

    A final read-through of every answer and piece of evidence, so you submit knowing it holds up.

Planning

What affects the effort

No two businesses start from the same place. These are the things that move the timeline most:

  • How tightly or loosely the scope is drawn
  • Whether Cyber Essentials is current and covers the same scope
  • How much of what you do is already written down
  • The quality of your existing records, such as access reviews, training and incident logs
  • The number of sites and how alike they are
Getting started

What we'll ask you for

You don't need everything on day one. To give you a sensible plan, it helps to have:

  • The tender or contract wording that mentions DCC
  • Your Cyber Essentials certificate and its scope, if you have one
  • A list of the systems and sites involved
  • Any policies you already have, even if they are rough
  • A named person who can answer our questions
Keeping track

One place for your answers and evidence

Every control, in plain English

Our client portal turns Level 0 and Level 1 into clear questions, so your team knows exactly what is being asked.

Owners and due dates

Assign each question to the right person, set a date and see at a glance what is still open.

Evidence alongside answers

Upload the proof next to each answer, so nothing has to be hunted down on submission day.

The portal is for clients we are working with. Portal log in

FAQs

Questions about Level 0 and Level 1

Do we need Cyber Essentials before DCC Level 0 or Level 1?

Yes. Cyber Essentials is the foundation for every DCC level. If you don't have a current certificate, we can prepare you for it in the same project.

How do I know whether I need Level 0 or Level 1?

The contract tells you. Look for the Cyber Risk Profile and the Risk Assessment Reference in the tender or contract. If you can't find them, send us what you have and we'll help you read it.

Does ISO2ISO carry out the DCC assessment?

No. The assessment is done by an independent approved certification body. We prepare you for it, and keeping those roles separate is what lets the certificate carry weight.

Is Level 1 a lot more work than Level 0?

Usually, yes. Level 0 rests on three controls, while Level 1 covers 101, so there are many more policies, records and pieces of evidence to prepare. The size of the gap depends on how much you already have in place.

Can we go straight to Level 1 and skip Level 0?

Yes. Hold the level your contract needs, or a higher one, and you meet the requirement. If you expect bigger contracts, aiming higher from the start can save repeating the work later.

Can you give me a price or timescale straight away?

For Level 0 we can usually give a firm picture quickly. For Level 1 we need to understand your scope and starting point first, because that is what drives the effort. A short call is enough to give you a realistic view.

How long does a DCC certificate last?

Three years, with an annual attestation to confirm the scope of your certification hasn't changed significantly. Your Cyber Essentials certification must stay current too. We can support you with both.

Free readiness call

Find out how close you are to certified.

A 30-minute call, no obligation. You'll leave knowing which standard or level you need, where your gaps are, and a realistic timeline.